For our electric awnings, we use an aluminium hollow chamber profile optimised for low sag as the winding axis. The drive and the keder grooves are concealed in the profile. The line guide is fully automatic. A rewinding disc on the winding shaft winds or unwinds the pull-out lines of the sails. A length equalising element compensates for differences in length between the sail and pull-out line lengths. The length levelling element also ensures that the sun awnings are always taut. All supports are made of robust stainless steel with an attractive surface finish (optionally powder-coated).

A wind and rain monitor is always active and protects the roller mechanism, the sail and also the attachment points from excessive strain caused by freshening wind or a rain shower (if the slope for safe water drainage is not maintained). The electric SunFurl® sun awning is conveniently operated via a radio module. Optionally, the drive can also be easily integrated into an existing house control system. Sail areas of up to approx. 60 m² (2 x 30 m²) can be realised effortlessly with this system. We would be happy to plan your system individually and provide you with a non-binding offer. Please send us pictures, sketches and desired options for planning your individual shade project.